Dealer Inquiries Welcome – just email us at sales@phytotronics.com
with
Backflow Preventer
Catalog No: 0001 (Case
of 12) & 0002 (50 Bulk-packed)
>Download flier
>Download directions
• Easily and accurately
applies fertilizers and other liquids to gardens, container
plants and greenhouse crops
• Attaches to standard hose fittings
• Prevents backflow should pressure fail
• Brass body for durability
Pestrap
Catalog No: 4500
(4" x 10" Yellow), 4505 (4" x 10" Blue), 4520
(10" x 16" Yellow), & 4525 (10" x 16"
Blue)
>Download flier
Among the easiest tools of
integrated pest management to use are the colored sticky cards
like Pestrap. These devices most are used for (1) monitoring
insect populations and, (2) for readily seen by insects. Pestrap
cards mass greater area of sticky surface than that trapping of
insects. Mass trapping requires a considerably used Pestrap
Mid-Size is for monitoring purposes. The Jumbo trap is used for
mass trapping and the used for monitoring.
Mid-Size Pestraps measure approximately 4" x 10" and
are available in yellow and blue. Used at the rate of 1 card for
every 500 to 1,000 sq. ft., these cards are assigned to
prescribed areas of the greenhouse with their locations mapped
and numbered. Cards should be inspected weekly to record the
number of each kind of insect trapped. Cards placed near doors
and vents will trap insects coming in from outside.
Jumbo Pestraps are available
in yellow and blue and are used to reduce populations of lying
insects such as whitefly, leafminer, fungus gnats, moths and
others. Mount traps just above the crop canopy. Traps are
suspended from a cable that runs the full length of greenhouse.
The traps are easily hung from the cable with "S"
hooks. For a greenhouse bench 90 feet long, 14 Jumbo Pestraps
will provide an effective total trapping surface. Traps measure
10" x 16". Discard traps when they are full.
Pestrap sheets are in packages of 10 + 2. The outer 2 sheets are
coated on 1 side only. The inner 10 traps are coated on both
sides. To avoid the transfer of the sticky material to the hands,
the use of disposable gloves is suggested. Neither the colored
cards nor the sticky adhesive are toxic.
Pestick
Catalog No: 4000 (Quart)
& 4002 (Gallon)
A clear sticky compound used
to prepare insect traps. Formulated to remain sticky for a long
period of time. Pestick is clear so that attractant colors show
through. Each gallon will cover about 500 square feet of surface
area. Cost is about 1/10 the cost of other sticky traps.
Excellent for IPM (Integrated Pest Management).
Pestick Plastic Sheeting
Catalog No: 4020 (Bright
Yellow), 4022 (Light Blue), 4026 (Red) & 4028 (Ivory)
A flexible, high density
plastic sheet that can be cut with a knife or scissors. Pestick
plastic sheeting is impervious to moisture and will retain its
color for up to a year even when exposed to the sun. For use with
Pestick Compound. Size: 24" x 45".
Wenger Professional Knives for Greenhouse,
Nursery, Grafting, and Florist
Model No: Call for info
Catalog No: 9600 (Grafting), 9601 (Budding), 9602 (Budding), 9603
(Grafting), 9604 (Pruning), 9605 (Budding with Brass Bark Lifter)
& 9606 (Blade & Brass, with Bark Lifter)
>Download flier
The Wenger "New
Generation" of Swiss Horticultural Knives are made with
stainless steel blades and high impact, red, plastic handles.
Lightweight, yet very durable.
Propagation Trays,
Domes and Clips
Model No: 2248WH (with
holes)& 2248NH (no holes)
Catalog No: 5000 (with holes), 5002 (no holes), & 5004
(domes)
Made of tough, heavyweight
food-grade ABS plastic sheeting for resilience. Tray dimensions:
45" x 23" O.D. at top, 42" x 20" I.D. at top,
42" x 19.5" I.D. bottom, 5" average depth.
Sidewall are tapered for stacking. Tray bottom is formed with
channels to allow for maximum drainage and to prevent pots from
sitting in water if used in an ebb and flow system. Extra deep
sidewalls allow for the installation of heating cables to
accelerate rooting or germination. dome cover retain humidity for
propagation purposes and is sloped for efficient drainage of
condensation. Dome is 6.5" tall in the center and 5" at
the eaves. Clear PET dome fits exactly over the rim of the tray
and eight clips are provided to secure dome to tray. NOTE: DOMES
ARE SOLD SEPARATELY.
Topgrafter Grafting
Machine and Replacement Blades
Catalog No: 9500
(Topgrafter) & 9501 (Replacement Blade-Topgrafter)
The Topgrafter produces a
"V" cut in the wood from 1/8" to 1 3/4" (3mm
to 20mm) diameter without any adjustment. It can be used in the
field or bench mounted. Blades remain sharp for up to 2000 or 300
cuts, at 2 cuts per tree before replenishing is necessary.
Chipbudder Grafting Machine and
Replacement Blades
Catalog No: 9505
(Chipbudder) & 9506 (Replacement Blade-Chipbudder)
The Chipbudder, like the
Topgrafter, requires no special skills to be operated, and can be
used in the field or bench mounted. Two adjustment screws permit
selection of the depth of cut, ranging from 3/16" to 2
3/8" (5mm to 60mm). The machine produces a dove tail cut at
both ends which yields very tight grafts.
Bench Mounts
for Grafting Machines
Catalog No: 9510
(Hand-Bench Mount) & 9512 (Foot Operated Mount)
HAND-BENCH MOUNT: A simple,
sturdy black plastic apparatus with a vertical locating post to
hold grafting machines in place for temporary bench mounted
operations. Attaches at the edges of table with 3 screws
(included).
FOOT OPERATED MOUNT: Consists of a 4 3/4" x 10 1/2"
aluminum plate with a vertical locating post and holding clamp
for mounting either grafting machine. Comes with foot pedal lever
with linkage to connect to the grafting machine. Requires a slot
to be cut in the bench for operation, designed for a more
permanent installation.
13688
Rider Trail North • Earth City, MO 63045
314-770-0717 • Fax 314-506-4587
email:
sales@phytotronics.com