Dealer Inquiries Welcome – just email us at sales@phytotronics.com
Growing and Irrigation Systems
Aqua-Trough
Components
Descriptions &
Specifications
Call for info on
Model and Catalog Numbers.
>Download brochure
AT 18 AQUA-TROUGH-PVC CHANNEL – 18’ Standard
length. Inside dimensions: 4.6” wide, 1.7” deep;
weight, 8.5 lbs/18”. 6’ lengths are available for UPS
shipments; allow for additional connectors, cement, etc.
ATEP AT ENDCAPS, PLAIN - Closes the downstream end of
the Aqua-Trough channel. Sealed with AT Silicone.
ATEWI AT ENDCAPS, WITH WATERING INLET - Closes the
Aqua-Trough channel at the up stream end.
ATC AT CONNECTORS - Used to join 2 or more lengths of
Aqua-Trough channels together with AT Silicone.
ATSIL AT SILICONE - (Silglaze II) Used for mounting
endcaps and connectors to Aqua-Trough channels. Uses standard
caulk gun for application. Manufactured for industrial use. Long
lasting and pliable.
Aqua-Trough
Hanging Accessories
ATHA AT
HANGER ASSEMBLY – Adjustable. Complete with 7’
of PVC coated steel wire, adjusting plate and 8 gauge galvanized
steel hanger the connects under outer flange of Aqua-Trough rims.
Wire allows 40” suspension from above support.
ATPVCW PVC COATED STEEL WIRE - Heavy gauge stranded
steel wire, coated with PVC. Used to suspend AT channels from
greenhouse trusses or other support members.
ATAP AT ADJUSTING PLATE - For use with PVC coated wire
in customized suspension systems to level Aqua-Trough sections.
ATBS AT REINFORCING BANDSTEEL - Requires 2 linear feet
(2 separate pieces) for every 1 linear foot of Aqua-Trough; rigid
galvanized steel, 1/8” x 3/4”x 12’; placed under
the outer flanges of trough for reinforcing to hold more weight
or allow for greater “on-center” spacings of hangers.
ATBC AT BANDSTEEL CONNECTOR BRACKET - Made of galvanized
steel, for connecting two pieces of bandsteel.
Aqua-Trough
Benching Accessories
ATCR AT
CRADLE – Designed for holding the Aqua-Trough
upright on an inexpensive 2” x 4” bench system or on
any existing bench system.
Water
Supply Components
ATST AT
SUPPLY TUBING – 1/8” (.125) I.D. polyethylene
tubing connecting at endcaps with water inlet to AT header line
water supply.
ATSP AT SUPPLY TUBING PUNCH – Used to punch
holes in the header line in which supply tubes are inserted.
ATHL AT HEADER LINE – 3/4” I.D. Heavy
duty poly pipe for delivering water to AT supply tubing.
ATDV AT DRAIN VALVE – 3/4” Female hose
swivel adapter to allow automatic draining of system when PSI is
reduced to zero.
13688
Rider Trail North • Earth City, MO 63045
314-770-0717 • Fax 314-506-4587
email:
sales@phytotronics.com