Dealer Inquiries Welcome – just email us at sales@phytotronics.com
CapMat II Capillary Matting
Catalog No: 7000 (4' x 100' roll) and 7001 (6' x 100'roll)
>Download flier
Made of lightweight non-woven polyester, not resistant, high strength capillary matting of gray color. It is resistant to shrinkage, chemical decomposition and being crushed. Can be used with Agribrom for algae control. It is reversible and will not fray after cutting. CAPMAT II is highly absorbent permitting water to wick rapidly to the roots.
CapMat II Distribution Kits
Catalog No: 7070 (4' Distribution Kit) and 7072 (6' Distribution Kit)
Kit includes: 1) Loc sleeve header fitted with a 3/4" female hose swivel inlet, ells, tees, and fasteners, drip hose and pressure regulator and gauge for either 4'x100' or 6'x100' bench. Complete directions included - operating pressure 8-12 PSI.
Phytotronics Misting Kits
Catalog No: 1300 (M25), 1305 (M50), 1310 (M75), 1315 (M100), 1320 (M125), 1325 (M150)
All necessary components are assembled into kits that serve 1/2" and 3/4" systems in 6 different lengths from 25' to 150'. Each kit is complete with solenoids, filters, nozzles, pvc fittings cement, wire, pre-drilled pipe, and installation instructions. Misting kits cover 4' to 6' bench widths. Order controllers separately.
Phytotronics Watering Kits
Catalog No: 1330 (W25), 1335 (W50), 1340 (W75), 1345 (W100), 1350 (W125), 1355 (W150)
All necessary components have been assembled into kits that serve 1/2" and 3/4" systems in 6 lengths from 25' to 150'. Each kit is complete with solenoids, filters, nozzles, pvc fittings and cement, wire, pipe and installation instructions. Watering kits cover up to a 15' diameter circle. Order controllers separately.
Phytotronics Irrigation & Sprinkler
Systems Cable
Model No: PW182
Catalog No: 2490
18 gauge, 2 conductor solid copper
wire insulated with white and red polypropylene. A rip cord is
provided within the jacket for easier jacket stripping. The
outside jacket color is a semi-rigid heavy gauge PVC and is light
blue in color. It is a rated for use up to 30 volt and is UL
approved for direct burial.
Plug-In 24-Volt Transformer
Model No: PT24
Catalog No: 2002
Plastic encased with outlet screw
for secure connections, fused secondary. Size 2 1/2” x 2
5/8” x 3 3/8” 40 VAC
INPUT 120 VAC; OUTPUT 24 VAC.
Wire In
24-Volt Transformer
Model No: DCT, 40-120
Catalog No: 2001
Size 2” x 2-1/4” x
3-1/2”; with 6” leads, 40 amps.
120 VAC INPUT; 24 VAC OUTPUT
Phytotronics 24 Volt Solenoid Valves
Model No: Call for info
Catalog No: 3400 through 3410
Nelson offers a solid line of
heavy duty, dependable valve products.
All models feature a glass-reinforced nylon body and bonnet to
help prevent leaks and breaks. A fully encapsulated solenoid and
bleed collar keep water corrosion outside the valve, protecting
your investment for years. 5 year manufacturer's warranty on
materials
and workmanship.
Asco Solenoid Valves, 24 Volt
Model No: 1/2"
8210-G15 3/4" 8210-G9
Catalog No: 3800 3801
24 Volt; 6 Watt; Min P.S.I. 5 -
Max P.S.I.125; Made of brass and stainless steel, designed for
repetitive use in misting and propagation systems - Red Hat II
Series.
Replacement Coils for
Asco Solenoid Valves
Model No: ASC24
Catalog No: 3810
24 Volt-Replacement coil used in
both 1/2” or 3/4” Asco Red Hat II Valves.
Red Hat II Repair Kits for Asco
Solenoid Valves
Model No: 1/2"
100-470 3/4" 158-811
Catalog No: 3812 3814
Repair kits used to field repair
either the 1/2" or the 3/4" Asco Red Hat II™
Valves.
Spin Filters
Model No: Call for info
Catalog No: 3700 through 3703
Glass reinforced polypropylene
with 150 mesh stainless steel screen. Working pressure up to 100
PSI. Unique spin clean action of the filter forces incoming dirty
water through a directional nozzle plate onto the inside of the
stainless steel screen. This
creates a centrifugal action which rotates debris down the
screenwall to the large debris holding basin. Debris can be
flushed through the bottom of the filter via a built in ball
valve. Easy no-hassle cleaning. Replacement screens are
available.
Nylon Strainers with Stainless Steel Screen
Model No: Call for info
Catalog No: 3600 through 3603
Made of extra strength durable
nylon.
Inlet and outlet are same size with standard pipe thread. Easy to
clean or replace screen; stainless steel screen is 80 mesh.
Replacement Screens for Nylon Strainers –
Stainless Steel
Model
No: Call for info
Catalog No: 3604 through 3606
80 Mesh SS
DGT Mist Nozzles (3/8" BSW)
Catalog
No: 3001 through 3004
DGT Nozzle – Pin color
indicates model.
DGT Mist Nozzle Replacement Pins
Catalog
No: 3009 through 3011
Pin color indicates model.
Available in blue, white, red, and yellow.
DGT Nozzle Mini Adapter
Catalog
No: 0322
Designed to accept the DGT nozzle.
Drill schedule 40 PVC pipe with 7/16” drill bit having 60ƒ
taper. Place Mini-Adapter in drilled hole. Screw nozzles into
Mini-Adapter until firm.
Phytomist Saddles
Catalog
No: 3104 and 3105
For cementing to schedule 40 or 80
PVC pipe to use Phytomist Nozzle. Requires 5/16” hole in PVC
for installation.
Available in 1/2" diameter and 3/4" diameter.
ULV (Ultra
Low Volume) Fog Nozzles
Model
No: Extra Fine through Course
Catalog No: 3118 through 3124
An ultra low volume fog nozzle for
use in cooling and humidifying or misting. The nozzle's orifice
is stainless steel mounted in a brass housing. For use with
1/8” pipe thread. Can be used with Phytomist saddles or PVC
nozzle adapters.
PVC Nozzle Extensions; Schedule 80
Catalog
No: 7002 through 7009
Schedule 80 PVC Extensions –
Used for heightening the sprayer nozzle above the water line.
This is needed in many situations when crop growth interferes
with spray pattern of nozzle. When mounted directly to water
line.
Available in lengths of 12", 18", 24", 36",
and 48".
PVC Nozzle Adapters
Catalog
No: 3020 (3/8" BSW x 1/2" FPT) and 3021 (3/8"BSW x
1/2" SLIP)
Two types of these handy PVC
Adapters are available. One has female pipe thread for attaching
to the riser, the other has a slip connection. Both have
3/8” BSW female thread so that the DGT nozzles simply screw
into adapter.
PVC Nozzle Adapters
Catalog
No: 3025 (1/8" BSW x 1/2" FPT) and 3026 (1/8" FPT
x 1/2"SLIP)
Two types of these handy PVC
Adapters are available. One has female pipe thread for attaching
to the riser, the other has a slip connection for PVC pipe. Both
have 1/8” female pipe thread so that either Baumac or
Flora-Mist nozzles simply screw into the adapter.
1" x
3/4" PVC Bushings
Model
No: Call for info
Catalog No: 3550 through 3556
Above bushings and adapters used
to reduce 1" Solenoids down to 3/4". "S"
denotes PVC Slip. "T" denotes Pipe Thread.
Automatic Drain Valve – Brass
Model
No: 8819
Catalog No: 3590
Ideal for draining water lines to
prevent dripping of misting nozzles. It can be used in a vertical
or horizontal position, requiring less than 5 PSI for pressure
relief. 1/2" male pipe thread.
Professional Water Pressure Gauge, by
Phytotronics
Model
No: Call for info
Catalog No: 3300 through 3302
0-120 PSI; 3/4" female hose
swivel. A very accurate water pressure gauge to measure the
Pounds per Square Inch (PSI). It will read up to 120 PSI and can
be permanently adapted to a system for constant monitoring of
water pressure. Dial measures 2 1/2" in diameter.
13688
Rider Trail North • Earth City, MO 63045
314-770-0717 • Fax 314-506-4587
email:
sales@phytotronics.com