^{Dealer Inquiries Welcome – just email us at sales@phytotronics.com}

FCM 20M+ Phytotronics Digital Light Meter
Model No: FCM-20M+
Catalog No: 1055

• 20,000Fc in 4 ranges and 20,000Lux in 4 ranges.
• Min/Max readings. Cosine and color corrected measurements.
• Utilizes precision silicon photodiode sensor with 3ft coiled cable for easy storage.
• Complete with built-in stand, remote sensor with protective cover, protective rubber holster, and 6 AAA batteries.

IBA Water Soluble Salts
Catalog No: 0338
>Download flier

• 1/5 the cost of other brands
• The most used plant rooting hormone to propagate plants from cuttings
IBA Water Soluble Salts dissolves in water without difficulty, is very inexpensive, and is easy to measure and keep in solution. It can be made into very high concentration stock solutions.
IBA Water Soluble Salts is US EPA registered for use by plant growers in nurseries and greenhouses. The approved label under the WPS has a Zero Hour Re-Entry Interval. Growers can apply IBA Water Soluble Salts to plants and remain in the growing area using minimum PPE with no notification requirement.
No potentiallly plant toxic alcohol is used to prepare IBA Water Soluble Salt solutions.

Catalog No: 1400
>Download flier
>Download instructions

• Works just like a leaf – The weight of the mist settling on the stainless steel screen turns off the solenoid.
• When the water evaporates, the “leaf” rises and the cycle starts over by again turning on the solenoid valve.
• Made with Electronic Components. It can be shipped by ground, sea, or air.
• Each is supplied with a 24 volt AC transformer.
• Prewired with 20’ of 18-gauge two-strand bell wire for easy attachment to a 24 volt solenoid.
• Designed to be operated on 24 volt AC current.
• Very easy to install – simply place on the misting bench, balance the “Leaf” and attach the wires to your solenoid valve (solenoid valve not included).
• The frame of the Electronic Leaf is made of stainless steel.
• Leaf is adjustable for more or less misting.

with Backflow Preventer



Catalog No: 0001 (Case of 12) & 0002 (50 Bulk-packed)
>Download flier
>Download directions

• Easily and accurately applies fertilizers and other liquids to gardens, container plants and greenhouse crops
• Attaches to standard hose fittings
• Prevents backflow should pressure fail
• Brass body for durability

12 Zone Controller
Model No: 12A
Catalog No: 1090
>Download flier

The new 12A twelve zone controller is what many of the large growers have been asking for. Easy to use and with the same reliable technology as used on the other Phytotronics controllers, this 12 zone controller is sure to be a hit.
The "at a glance” design is what growers have been looking for. No longer will you have to have a manual handy to program your mist cycles. This unit is so simple anyone could understand it "at a glance".
The plug in 24 volt transformer allows the unit to be plugged into a standard 120 volt outlet and converts the power to 24 volts for safe operation. If you do misting on a large scale, this controller is what you have been waiting for.
VARIABLE MISTING TIME PER ZONE
“On” time settings can be set at 2, 4, 6, 8, 10, 12, 16, or 20 seconds.
VARIABLE INTERVALS BETWEEN "ON" TIME
Time between misting periods can be set at 2, 4, 6,10, 20, 20, 30, 60 or 120 minutes.
INCREASED FLEXIBILITY
The “Time Extender” switch (on lower right side of controller) multiplies all times by 1/2x, 1x, 2x and 3x.

1A Single Zone Controller
Model No: 1A
Catalog No: 1080
>Download flier

The single channel mist controller is great for single zone misting benches. It can also be used on ebb and flow benches and other hydroponic setups that need frequent watering schedules. The controller is provided with a 24 volt ac wall-mount transformer which provides safe operation and an output of 24 volts needed for most solenoid valves.
The "seconds of on time" knob allows for 2, 4, 6, 8, 10, 12, 15, 20, 30, 40, 50, and 60 seconds of mist.
The "minutes between on time" knob allows for 2, 4, 6, 10, 15, 20, 30, 60, and 120 minutes between mist cycles.
An "on" and "off" is provided for manual control of the solenoid
Great for propagation houses, small hobby growers and hydroponic growers.
Can be used with a relay for voltages of 120vac or 240vac depending on the relay being used.
The Phytotronics mist controller is built with the same standards as the other famous mist clocks they offer.
At a glance design provides a safe, reliable, easy to use and easy to understand misting controller.
One year warranty.

1B Single Zone Controller
Model No: 1B
Catalog No: 1082

The single channel mist controller is great for single zone misting benches. 24 volt AC wall-mount transformer. The "minutes of on time" knob allows for 2, 4, 6, 8, 10, 12, 15, 20, 30, 40, 50, and 60 minutes of mist. The "minutes of off time" knob allows for 2, 4, 6, 10, 15, 20, 30, 60, and 120 minutes between mist cycles. An "on" and "off" is provided for manual control of the solenoid. Can be used with a relay for voltages of 120vac or 240vac depending on the relay being used. 1 year warranty.

1C Single Zone Controller
Model No: 1C
Catalog No: 1084

Same great features as the 1A but with a “minutes of on time” and “hours of off time”. This allows for 2, 4, 6, 8, 10, 12, 15, 20, 30, 40, 50, 60 “minutes of on time” and 2 to 120 “hours of off” time. An "on" and "off" is provided for manual control of the solenoid. Can be used with a relay for voltages of 120vac or 240vac depending on the relay being used. 1 year warranty.

RHIZOPON Rooting Compounds
Available in DRY POWDER and WATER SOLUBLE TABLETS

Rhizopon AA rooting hormones act with the plants own natural rooting regulators to aid information.
The rapid generation of new adventitious roots is necessary for the plant to transport water and essential nutrients from the media.
Rhizopon products have a unique formulas which induce uniform absorption of the active ingredients.
Rhizopon AA are the first rooting hormones with US EPA label approved zero hour REI! Workers can remain in the propagation area during and after application with minimum PPE.

Rhizopon b.v. is the world’s largest and oldest company solely devoted to rooting products and technology.
When you treat many different types of cuttings that require different hormone concentrations use Rhizopon AA #1, #2 and #3 dry powders. Dry powders do not need special preparation.
Use Rhizopon AA Water Soluble TAblet solutions when treating many cuttings, such as chrysanthemums, fuschia and geranium, by Total Immerse.
You make Rhizopon AA Water Soluble Tablet solutions from very dilute to extremely concentrated.
The time of the year may change the method and concentration.
For example, greenwood cuttings may root better with liquid treatment. Later in the growing season more woody cuttings from the same plant may root better with powder treatment.

• EPA approved
• Promote Rooting of Cuttings
• Improved Plant Growth
• Improved Transplanting
• No REI
• Versatile & Easy to Use
• Improved Root Mass
• Increase Uptake of Water & Nutrients
• Increase Crop & Flower Yield
• Reduce Drought, Winter Stress
• Wide Dosage Range

RHIZOPON DRY ROOTING POWDER HORMONES are available in three concentrations for propagation of plants by the dry-dip method. Rhizopon powders have slow-release active ingredients to promote high production yields and uniform, symmetrical roots masses.

The Dry Dip Method
• From the stock container, take off enough powder for one time use. Do not contaminate the stock container of powder by returning the used portion to the container. Dispose of the used portion.
• Dip the basal end of the cuttings 3/4 to 1 inch into the powder. Make sure that the powder is evenly distributed in a thin even layer.
Avoid contact between the powder and foliage and other over ground parts of the stem since it may cause phyto toxicity.
• Tap off the excess powder.
• Plant the cuttings immediately in moist media. Pack down media firmly around the cutting.

For more information about Rhizopon, visit www.rooting-hormones.com .

13688 Rider Trail North  •   Earth City, MO 63045
314-770-0717  •   Fax 314-506-4587
email: sales@phytotronics.com