^{Dealer Inquiries Welcome – just email us at sales@phytotronics.com}

Thermostat
Model No: RHT4
Catalog No: 8525
>Download flier

• For automatic control of heating elements such as the Redi-Heat Propagation Mats or the Redi-Heat Cables or other heating mats or cables.
• Up to four heating elements may be plugged into the thermostat. Each heating device will be heated to setting the grower dials on the thermostat control knob and position of sensor.
• Economical to use for many propagation areas.
• Each of the four outlets are grounded.
• The total wattage used by all heating elements plugged into the thermostat can be up to 1800 watts.
• The extra long capillary and bulb measures 72”.
• The heavy duty power cord is 10’ long with a molded NEMA three prong plug for 120 volt AC current.
• The Pilot light indicates when heating elements are on.
• Temperature range, 40†F to 100†F with an accuracy of+/-3†F.
• Size: 6 1/2” wide x 4 1/2” high x 3” deep
NOTE: See “BENCH PLATE” for installing the Thermostat on or near the propagation area.

Propagation Mats
Catalog No: 8530 (12" x 5'), 8532 (12" x 10'), 8534 (12" x 20') 8536 (17" x 5'), 8538 (17" x 10'), 8540 (21" x 5') & 8542 (21" x 10')
>Download flier

• The new Redi-Heat Propagation Mats are portable and can be used anywhere root zone heat is necessary.
• They provide even, constant heat to root zone for flats and pots.
• Designed for use on greenhouse benches or any flat surface.
• Water-proof and fully grounded against electrical shock. As with all electrical products, use care when working with and around the mats.
• Redi-Heat Mats are provided with a heavy duty 8’ cord and a molded NEMA three prong plug for 120 volt AC current.
• The mats are easy to install and economical to operate.
• Excellent for plant propagation or growing.

REDI-HEAT Propagation Mats are available in 3 widths:
12” wide in lengths of 5, 10 and 20 feet
Output: 20 watts per linear foot
17” wide in lengths of 5 and 10 feet
Output: 30 watts per linear foot
21” wide in lengths of 5 and 10 feet
Output: 40 watts per linear foot

• When using mats with GFI outlets, stay below 500 watts to avoid tripping the GFI

Bench Plate
Model No: TBP
Catalog No: 8529

• Designed for use with the RHT4 or DRHT4 thermostat
• The Bench Plate allows the thermostats to be installed in a vertical position on or near a propagation bench. This helps prevent the thermostat from being subjected to moisture during watering.
• Each Bench Plate comes with 4 nuts & bolts for attaching the thermostats in the pre-drilled holes and 4 screws to attach the plate to a bench or other area.

13688 Rider Trail North  •   Earth City, MO 63045
314-770-0717  •   Fax 314-506-4587
email: sales@phytotronics.com